An illustrative expedition holdall, with a rubberised base and a long top zip, is the product in this demo. Choose a colour and a capacity of 40, 55 or 70 litres, and the summary records the bag for a quote.

Holdall buyers are often heading where hard luggage is unwelcome: small boats, light aircraft, safari vehicles and overland trucks. A soft bag squeezes into spaces a suitcase cannot, and that is usually why they are shopping. The capacity decision depends on trip length and any weight limits on the way. Colour has a practical edge too, since desert tan hides dust and black hides grime, while deep red and ocean blue stand out on a crowded deck.

Expedition Holdall in black

Outdoor Configurator demo

Expedition Holdall

Colour Black
Capacity 40 L
Product
Expedition Holdall
Colour
Black
Capacity
40 L
Request a quote for this build

Illustrative product. The design and images are generated examples, not a real model for sale.

What you can configure

Black, deep red, ocean blue and desert tan are live, with olive and light grey also in the range. The rubberised reinforced bottom panel and the zip along the middle of the top are the same in every image. Capacity is 40, 55 or 70 litres. Length is what holdall buyers check, so a production build would picture each capacity against a common reference rather than keep one photo, as this demo does.

  • Colour: Black, Deep Red, Ocean Blue, Desert Tan
  • Capacity: 40 L, 55 L, 70 L

Why a configurator suits holdalls

Soft travel bags sell on trust in their construction. Buyers zoom into the base, the zip and the handles before anything else. A configurator with detail views for each of those, consistent across six colours and three capacities, gives reassurance that a single hero image cannot.

Capacity is the other source of uncertainty. Litres are abstract, and the difference between 55 and 70 in a holdall is mostly length. Showing each capacity beside a familiar reference, such as a cabin bag outline or a car boot, tells buyers whether it will fit the luggage rack, the boat locker or the back of a vehicle.

Getting that right also protects margins. A holdall that turns out too long for a light aircraft's hold, or too small for a three-week trip, comes back after a single use. Stating the dimensions with each capacity, and showing how the bag packs with a few typical loads, keeps buyers from guessing and keeps eighteen variants manageable for the brand.

How a production version would be built

For a holdall, I would photograph one capacity in every colour and the other two capacities in a single colour, then produce the remaining combinations as colour layers. Detail views of the base, zip and handles are shot once and recoloured to match. Fabric texture should survive recolouring, which needs a careful mask around stitching and webbing. The brand supplies dimensions, empty weight, SKUs for every combination and stock. Orders can go to a Shopify basket or, for expedition operators buying several, a quote request.

Build sheet for this range

  • Colours in the full range: 6 (4 shown in this demo)
  • Capacity choices: 3
  • Combinations to support: 6 × 3 = 18
  • Images for one photograph per combination at 3 angles: 54
  • Images if capacities can be shown as separate layers, at 3 angles: 27
  • Data each of the 18 combinations needs: a SKU or variant ID, price, stock or lead time, and any dimensions or specification that change

Questions about holdall configurators

Can the configurator show detail views of the base, zip and handles?

Yes. Detail views sit as thumbnails beside the main image and update with the chosen colour. For a soft holdall, the reinforced base, the zip and the carry handles are where buyers judge quality, so these are worth shooting properly rather than relying on the main image at high zoom.

How do we show the length difference between 40, 55 and 70 litres?

Side by side at the same scale, with length, width and height listed beneath each. A reference object, such as a standard cabin bag outline, makes the scale obvious. When the buyer changes capacity, the main image switches to the matching bag so it stays consistent with the order.

Can shoulder straps or backpack straps be offered as an option?

Yes, if your range includes them. Carry options are a natural second option set for a holdall: shoulder strap, backpack straps or handles only. Each can be shot as a separate layer from the same angle, so it appears on any colour. The summary records the choice for picking and packing.

Can the configurator suggest a capacity for a given trip length?

It can, with a short question about trip length and whether the bag is the main luggage. The suggestion should be a starting point, explained in plain terms. Expedition operators sometimes link their own packing lists, so a client booking a particular trip is pointed to the right holdall.

More outdoor gear configurator demos

All outdoor gear configurator demos

A configurator for your holdalls

This demo uses an illustrative product. If you sell holdalls, I can build the same experience around your own range, photography and ordering process, connected to Shopify, WooCommerce or a quote workflow. I reply to enquiries within two UK working days.