In this demo, an illustrative arched kitchen tap with a docked spray head and a single-hole mount can be configured by finish and spray setting. Each choice is carried into the quote summary.
In a Shaker or farmhouse kitchen, the tap behaves like jewellery. It sits above a white ceramic sink between painted cabinets, and its finish is expected to agree with the cup handles, the knobs and sometimes the light fittings. People choosing champagne or bronze are often building a scheme around warm metals. Their real concern is whether the tap will sit happily beside handles they have already bought.
Kitchen Configurator demo
Arched Kitchen Tap
- Product
- Arched Kitchen Tap
- Colour
- Champagne
- Spray
- Two-mode
Illustrative product. The design and images are generated examples, not a real model for sale.
What you can configure
Champagne, brushed steel, matte black and chrome are shown here, with gunmetal and bronze in the wider range. You can choose two-mode or three-mode spray, which is recorded in the summary but does not change the image. Extra spray modes typically add a pause or blade setting to the usual stream and spray, which helps anyone rinsing plates or cleaning a deep ceramic sink.
- Colour: Champagne, Brushed Steel, Matte Black, Chrome
- Spray: Two-mode, Three-mode
Why a configurator suits kitchen taps
Warm metal finishes vary between manufacturers and sometimes between production batches. A champagne tap from one brand and champagne handles from another can look like different colours. Buyers know this, so they hesitate, ask for samples and often wait until they can see a finish in person. A configurator with accurate, consistent images narrows that gap, even if it never closes it fully.
Specifying one of 12 tap codes is a small decision inside a big kitchen project, and it needs recording precisely. A configurator lets the designer save the tap with its code, add it to a project list and send it to the client with the sink and handles. The installer then fits the tap that was specified, not the closest one in stock.
For merchants and kitchen studios there is a stock benefit as well. Each configured tap carries its exact code, so studios can see which finishes are being specified ahead of firm orders. That helps plan stock of slower finishes such as bronze without holding all six in every branch.
How a production version would be built
I would render each finish from the manufacturer's 3D model under one lighting setup, so champagne and bronze can be compared fairly. A detail view of the single-hole mount and the docked head helps installers and designers. Spray modes are best shown as small illustrations of each pattern rather than a new product image. The manufacturer supplies codes, finish names, technical drawings and any finish-matched accessories. The build can sit inside a showroom quote, connect to an online store, or feed a 3D product visualisation of the whole kitchen scheme.
Build sheet for this range
- Colours in the full range: 6 (4 shown in this demo)
- Spray choices: 2
- Combinations to support: 6 × 2 = 12
- Images for one photograph per combination at 3 angles: 36
- Images if spray modes can be shown as separate layers, at 3 angles: 24
- Data each of the 12 combinations needs: a SKU or variant ID, price, stock or lead time, and any dimensions or specification that change
Questions about kitchen tap configurators
Can the configurator help buyers match the tap finish to their cabinet handles?
It can help, though it cannot guarantee a match across brands. If you sell handles in the same finishes, the configurator can show them together. If not, a close-up of the finish in daylight and a precise finish name give buyers a better reference when comparing samples at home.
How should we show the difference between two-mode and three-mode spray?
Small illustrations or a short looping image of each spray pattern work better than another product photo, because the tap itself looks the same. A plain description of each mode should sit beside the option. Buyers mainly want to know which setting they will use for rinsing plates and filling pans.
Can a kitchen designer save the tap to a project and share it with a client?
Yes. Each configuration can be saved with its image, finish, spray option and code, then shared as a link or added to a project list. The client sees exactly what was specified. If the client switches to brushed steel, the designer updates the configuration rather than retyping the specification.
Can warm finishes stay consistent across a whole product range on screen?
They can, on screen at least. Rendering every product under the same lighting, and calibrating each finish against a master sample, keeps champagne looking like champagne on the tap, the sink and the handles. Physical batch variation still exists, so offering finish samples remains sensible for warm metals.
More kitchen configurator demos
Classic Kitchen Mixer
Countertop Air Roaster
Deep Granite Sink
Deep Steel Sink
Dial Smoothie Maker
Digital Multicooker
All kitchen product configurator demos
A configurator for your kitchen taps
This demo uses an illustrative product. If you sell kitchen taps, I can build the same experience around your own range, photography and ordering process, connected to Shopify, WooCommerce or a quote workflow. I reply to enquiries within two UK working days.