You can configure this illustrative squared inset basin in four glazes and two widths, 500 mm or 590 mm. It is an oblong bowl with rounded corners, set beneath a quartz vanity top in a busy family bathroom.
Family bathrooms are where double vanities earn their keep, and this basin is often bought in pairs. The width question then becomes a layout question. Two 590 mm basins need a long vanity and leave less worktop between them. Two 500 mm basins fit a shorter run but give each person less room at the bowl.
Bathroom Configurator demo
Squared Inset Basin
- Product
- Squared Inset Basin
- Colour
- Gloss White
- Width
- 500 mm
Illustrative product. The design and images are generated examples, not a real model for sale.
What you can configure
The glazes in play are gloss white, biscuit, matte black and stone grey, four of six, with 500 mm or 590 mm widths. Rounded internal corners are easier to wipe clean than sharp ones, which counts in a busy family bathroom. Width is part of the summary, though both sizes share one image for now.
- Colour: Gloss White, Biscuit, Matte Black, Stone Grey
- Width: 500 mm, 590 mm
Why a configurator suits basins
Buyers of double vanities are planning a run of furniture, not a basin. They need to know whether two basins fit their vanity length, how much worktop remains, and where the taps go. A configurator that takes the vanity length and shows which widths fit, singly or in pairs, answers the question most basin product pages simply ignore.
That makes the basin a lead into a bigger sale. Once width is settled, the vanity unit, worktop, taps and wastes follow. Kitchen and bathroom showrooms already sell this way in person. A configurator gives them the same structure online, ending in a quote for the whole vanity rather than a single basin in a basket.
Six glazes in two widths gives twelve basins, and a double vanity doubles every line. For the retailer, a configured vanity arrives with quantities, dimensions and finishes already resolved. That trims the back-and-forth that usually follows a showroom visit, and hands the fitter a clear, complete specification.
How a production version would be built
The basin would be rendered into a vanity top that lengthens or shortens. One or two bowls are placed by rules from the product data. I would ask the retailer for SKUs, widths, minimum spacing between basins and from the worktop edge, and the vanity lengths offered. Matching taps and wastes come from the same range. Orders go to a quote or basket, connected to the retailer's CRM or ERP. Sizing a vanity run works much like a furniture configurator.
Build sheet for this range
- Colours in the full range: 6 (4 shown in this demo)
- Width choices: 2
- Combinations to support: 6 × 2 = 12
- Images for one photograph per combination at 3 angles: 36
- Images if widths can be shown as separate layers, at 3 angles: 24
- Data each of the 12 combinations needs: a SKU or variant ID, price, stock or lead time, and any dimensions or specification that change
Questions about basin configurators
Will it tell us whether two basins fit a customer's vanity?
Yes. The customer enters the vanity length or picks one from your range. The configurator then calculates whether one or two basins of each width fit, using the minimum spacing you specify. It then shows the layout from above. Combinations that do not fit are disabled with a short reason.
Can it quote for the whole vanity, not just the basin?
That is where it becomes most useful. Once the basins are placed, the configurator adds the vanity unit, worktop, taps and wastes, each with its own options. The result is a single quote with every part listed. In a showroom, a staff login can adjust pricing or add fitting before the quote goes out.
What makes 500 mm and 590 mm easy to compare on screen?
A top-down layout at true scale, ideally with a tap and a hand towel for reference. Ninety millimetres is hard to picture as a number but obvious when two layouts sit side by side. A switch between widths in the same view is clearer than two separate product images.
Do matte black inset basins suit a family bathroom?
They can, but buyers should know that dark matte glazes show limescale and soap residue more than gloss white. The configurator can show a care note when matte black is selected. That honesty tends to reduce complaints, and buyers who still choose it do so knowing the upkeep involved.
More bathroom configurator demos
Three-Hole Basin Set
Waterfall Basin Tap
Wide Block Basin
Angular Basin Tap
Apron Front Bath
Column Basin Tap
All bathroom product configurator demos
A configurator for your basins
This demo uses an illustrative product. If you sell basins, I can build the same experience around your own range, photography and ordering process, connected to Shopify, WooCommerce or a quote workflow. I reply to enquiries within two UK working days.